Parts for PSD200V64BA — GE Dishwasher
We found 9 parts confirmed to fit the GE Dishwasher PSD200V64BA.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WD12X440 | Roller | 6 models | — |
| WD12X441 | Roller | 6 models | — |
| WD16X313 | Dishwasher Detergent Dispenser Shaft | 347 models | — |
| WD15X93 | Dishwasher Water Inlet Valve | 430 models | — |
| WD21X557 | Interlock Switch | 729 models | — |
| WD8X228 | Dishwasher Tub Corner Baffle, Left WD8X228 | 747 models | $22.78 |
| WD8X227 | Dishwasher Tub Corner Baffle, Right WD8X227 | 747 models | $24.00 |
| WD12X344 | Cap | 846 models | — |
| WD8X181 | Dishwasher Gate Shaft Seal WD8X181 | 972 models | $35.85 |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Drive system (belts, pulleys, motors)
Symptom: A dish rack, spray arm, or wash-motor component isn't turning or sliding the way it should.
Check: Check that the part in question turns or slides freely by hand, and look for a cracked, worn, or seized point where it should pivot or roll.
Parts in this group on PSD200V-64BA: WD12X440 (Roller), WD12X441 (Roller).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on PSD200V-64BA: WD16X313 (Dishwasher Detergent Dispenser Shaft), WD21X557 (Interlock Switch), WD8X228 (Dishwasher Tub Corner Baffle, Left WD8X228), WD8X227 (Dishwasher Tub Corner Baffle, Right WD8X227), WD8X181 (Dishwasher Gate Shaft Seal WD8X181).
Water inlet and drainage
Symptom: The dishwasher won't fill, or dishes come out with standing water still in the tub bottom after the cycle ends.
Check: Check the inlet valve's screen filter for sediment, and check the drain pump and drain hose for a clog or a jammed object -- a piece of broken glass or a bottle cap is a common culprit.
Parts in this group on PSD200V-64BA: WD15X93 (Dishwasher Water Inlet Valve).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on PSD200V-64BA: WD12X344 (Cap).
Before you buy
Match PSD200V64BA exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Dishwasher models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.