Parts for NAH6800AWW — Whirlpool Washer
We found 12 parts confirmed to fit the Whirlpool Washer NAH6800AWW.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 22004477 | Washer Drain Hose | This model only | — |
| 22003834 | Washer Water Inlet Valve with Thermistor | 5 models | — |
| WP22004435 | Door Lock Latch | 7 models | $187.03 |
| WP22003834 | Water Inlet Valve with Thermistor | 11 models | $116.49 |
| 22003295 | Outer Clamp | 13 models | — |
| 22002053 | Sump Clamp | 20 models | — |
| 12001930 | Dispenser Valve Assembly | 26 models | $117.58 |
| 22003072 | Dishwasher Drain Hose Clamp | 32 models | — |
| 22003073 | Hose Clamp | 33 models | — |
| 22001984 | Drain Hose Clamp | 47 models | — |
| 22002853 | Hose Clamp | 119 models | — |
| 337891 | Inlet Hose | 539 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on NAH6800AWW: 22004477 (Washer Drain Hose), 22003072 (Dishwasher Drain Hose Clamp), 22001984 (Drain Hose Clamp).
Heat control (thermostats, fuses, heating element)
Symptom: The appliance runs but heats or cools inconsistently, or shuts off partway through a cycle.
Check: With the appliance unplugged, check continuity across the part with a multimeter -- no continuity means it has failed.
Parts in this group on NAH6800AWW: 22003834 (Washer Water Inlet Valve with Thermistor), WP22003834 (Water Inlet Valve with Thermistor).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on NAH6800AWW: WP22004435 (Door Lock Latch), 22003295 (Outer Clamp), 22002053 (Sump Clamp), 12001930 (Dispenser Valve Assembly), 22003073 (Hose Clamp), 22002853 (Hose Clamp), 337891 (Inlet Hose).
Before you buy
Match NAH6800AWW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.