Parts for MVWB450WQ0 — Whirlpool Washer
We found 34 parts confirmed to fit the Whirlpool Washer MVWB450WQ0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WPW10242338 | RING-TUB | 22 models | $81.84 |
| WPW10141678 | Top Panel | 24 models | $229.84 |
| WPW10172154 | Dispenser | 30 models | $86.62 |
| WPW10187307 | Dispenser | 30 models | $115.48 |
| WPW10236686 | Hose | 30 models | $44.23 |
| W11252784 | Plate | 30 models | $117.51 |
| WPW10172146 | Softener Dispenser | 30 models | $95.91 |
| W10247710 | Suspension Rod Kit | 30 models | $124.60–$124.61 |
| W10364988 | Water Inlet Valve with Wire Harness | 30 models | $215.70 |
| W10155921 | Water Pump | 45 models | — |
| 8565324 | 10-16 X 1.75 #8HW/CR HL | 47 models | $10.71 |
| WP8563877 | Dispenser Housing | 47 models | $12.15 |
| WPW10076260 | Washer | 47 models | $7.47 |
| WPW10119519 | Washer Bearing | 48 models | $5.16–$9.62 |
| W10137685 | Sensor | 53 models | — |
| WP8563876 | Bezel | 54 models | $11.73–$23.60 |
| WP8563964 | Washer Hinge | 59 models | $5.16–$9.62 |
| WPW10178988 | Washer Sensor | 64 models | $21.76–$38.96 |
| WP8564017 | Cup, Suspension (4) | 67 models | $12.83–$23.60 |
| WP8543774 | Re-circulation Hose | 67 models | $27.23–$48.45 |
| WPW10160572 | Retainer, Drain Hose Storage | 67 models | $5.16–$9.62 |
| 280146 | Rotor | 67 models | $184.47–$210.53 |
| WP8557836 | Stator Plate | 67 models | $36.61–$55.29 |
| WPW10619844 | Washer Lid Lock Assembly | 67 models | $58.12–$81.00 |
| WPW10419333 | Motor Stator Assembly | 70 models | $173.29–$205.39 |
| 8182768 | Clamp | 140 models | — |
| 8317496 | Clamp | 142 models | — |
| 8565170 | Stator | 175 models | — |
| W10435302 | Tub Seal and Bearing Kit | 176 models | $83.27–$105.07 |
| W10059230 | Washer Lid Lock | 201 models | — |
| 8572540 | Hose | 222 models | — |
| 370451 | Hose Clamp | 255 models | — |
| 371503 | Clamp | 291 models | — |
| 8533953 | Washer Screw | 354 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on MVWB450WQ0: WPW10242338 (RING-TUB), WPW10172154 (Dispenser), WPW10187307 (Dispenser), WPW10236686 (Hose), W11252784 (Plate), WPW10172146 (Softener Dispenser), 8565324 (10-16 X 1.75 #8HW/CR HL), WPW10076260 (Washer), WPW10119519 (Washer Bearing), W10137685 (Sensor), WPW10178988 (Washer Sensor), WP8543774 (Re-circulation Hose), 280146 (Rotor), WP8557836 (Stator Plate), WPW10419333 (Motor Stator Assembly), 8182768 (Clamp), 8317496 (Clamp), 8565170 (Stator), W10435302 (Tub Seal and Bearing Kit), 8572540 (Hose), 370451 (Hose Clamp), 371503 (Clamp).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on MVWB450WQ0: WPW10141678 (Top Panel), WP8563877 (Dispenser Housing), WP8563876 (Bezel), WP8563964 (Washer Hinge), 8533953 (Washer Screw).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on MVWB450WQ0: W10247710 (Suspension Rod Kit), WP8564017 (Cup, Suspension (4)).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on MVWB450WQ0: W10364988 (Water Inlet Valve with Wire Harness), W10155921 (Water Pump), WPW10160572 (Retainer, Drain Hose Storage).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on MVWB450WQ0: WPW10619844 (Washer Lid Lock Assembly), W10059230 (Washer Lid Lock).
Before you buy
Match MVWB450WQ0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.