Parts for MHW3505FW1 — Whirlpool Washer
We found 31 parts confirmed to fit the Whirlpool Washer MHW3505FW1.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| W11201284 | Electronic Control Board | This model only | $235.03 |
| W11233991 | HANDLE | 4 models | $83.13 |
| W10911040 | PANEL-CNTL | 4 models | $263.71 |
| W10525781 | Washer Water-Level Pressure Switch Hose | 25 models | — |
| W11229597 | Wire Harness | 27 models | $81.63 |
| WPW10597205 | Baffle | 30 models | $59.47 |
| W11568579 | CAP | 30 models | $21.45 |
| WPW10424239 | DOOR-OUTER | 30 models | $169.86 |
| W11712579 | Filter Element | 30 models | $25.75 |
| W11106747 | Front Load Washer Bellow | 30 models | $123.59–$123.60 |
| W11044559 | HOSE | 30 models | $27.36 |
| WPW10562025 | Internal Drain Hose | 30 models | $48.45 |
| W11673307 | O-RING, CAP - FILTER | 30 models | $6.40 |
| WPW10544980 | Rotor | 30 models | $179.04 |
| W10870753 | SHIELD | 30 models | $29.47 |
| W10870751 | STATOR | 30 models | $216.46 |
| W10903220 | TRAP | 30 models | $31.58 |
| W10599356 | Water Valve Assembly | 30 models | $111.43 |
| WPW10605427 | Drain Pump | 47 models | $36.60–$56.34 |
| W10763470 | Shipping Bolt Kit | 48 models | $31.20–$47.40 |
| WPW10365885 | Dispenser Drawer Assembly | 53 models | $47.21–$79.31 |
| WPW10443885 | Washer Lock Door | 56 models | $60.21–$74.74 |
| WPW10208373 | Top Panel | 61 models | $185.74–$225.47 |
| W10151157 | Clamp | 102 models | — |
| 357640 | SCREW | 117 models | — |
| W10443885 | Washer Door Lock | 118 models | — |
| W10365885 | Washer Dispenser Drawer Assembly | 123 models | — |
| 8212487 | Washer Water Inlet Hose, 2-pack | 125 models | — |
| W10448876 | Washer Water-Level Pressure Switch | 173 models | — |
| W10237503 | Washer Door Boot Spring Clamp | 202 models | — |
| W10096851 | Clamp | 249 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on MHW3505FW1: W11201284 (Electronic Control Board), W10525781 (Washer Water-Level Pressure Switch Hose), W11229597 (Wire Harness), W10448876 (Washer Water-Level Pressure Switch).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on MHW3505FW1: W11233991 (HANDLE), W10911040 (PANEL-CNTL), W11568579 (CAP), W11673307 (O-RING, CAP - FILTER), W10870753 (SHIELD), WPW10208373 (Top Panel), 357640 (SCREW), W10237503 (Washer Door Boot Spring Clamp).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on MHW3505FW1: WPW10597205 (Baffle), WPW10424239 (DOOR-OUTER), W11712579 (Filter Element), W11106747 (Front Load Washer Bellow), W11044559 (HOSE), WPW10544980 (Rotor), W10870751 (STATOR), W10903220 (TRAP), W10599356 (Water Valve Assembly), W10763470 (Shipping Bolt Kit), WPW10365885 (Dispenser Drawer Assembly), WPW10443885 (Washer Lock Door), W10151157 (Clamp), W10443885 (Washer Door Lock), W10365885 (Washer Dispenser Drawer Assembly), W10096851 (Clamp).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on MHW3505FW1: WPW10562025 (Internal Drain Hose), WPW10605427 (Drain Pump), 8212487 (Washer Water Inlet Hose, 2-pack).
Before you buy
Match MHW3505FW1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.