Parts for MHN30PDBGW0 — Whirlpool Washer

We found 23 parts confirmed to fit the Whirlpool Washer MHN30PDBGW0.

Compatibility table

All 23 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
WPW10311189Control, Electric (Commercial)3 models$227.93
3976300Washer4 models
8540090Washer Outer Tub Gasket14 models
W11222077BELLOW30 models$169.35
WPW10260319Belt30 models$54.24
WPW10137460Commercial Cover30 models$72.00
WPW10200747Counterweight30 models$94.10
WPW10223198Counterweight30 models$116.49
W10395619DRAWER30 models$59.47
WPW10298953Door Commercial30 models$6.40
WPW10198417Door Hinge30 models$149.54
WPW10137404FRAME *COMMERCIAL*30 models$176.27
WPW10137432Handle Commercial30 models$49.50
WPW10272563Hose30 models$26.82
WPW10140858Key Access Door30 models$18.22
W11191299MOTOR-DRVE30 models$188.55
WPW10198440RING-TRIM *COMMERCIAL*30 models$68.86
WPW10112925Washer Door Handle - White30 models$24.67
8540221Washer Door Strike30 models
8540012Washer Tub-to-Pump Hose73 models
W10096852Clamp151 models
8540108Washer Door Boot Spring Clamp169 models
8540063Washer Dispenser Hose201 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on MHN30PDBGW0: WPW10311189 (Control, Electric (Commercial)), 3976300 (Washer), W11222077 (BELLOW), WPW10200747 (Counterweight), WPW10223198 (Counterweight), W10395619 (DRAWER), WPW10298953 (Door Commercial), WPW10137404 (FRAME *COMMERCIAL*), WPW10272563 (Hose), WPW10140858 (Key Access Door), W11191299 (MOTOR-DRVE), 8540221 (Washer Door Strike), W10096852 (Clamp), 8540063 (Washer Dispenser Hose).

Door and drum seals

Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.

Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.

Parts in this group on MHN30PDBGW0: 8540090 (Washer Outer Tub Gasket).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on MHN30PDBGW0: WPW10260319 (Belt).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on MHN30PDBGW0: WPW10137460 (Commercial Cover), WPW10198417 (Door Hinge), WPW10137432 (Handle Commercial), WPW10198440 (RING-TRIM *COMMERCIAL*), WPW10112925 (Washer Door Handle - White), 8540108 (Washer Door Boot Spring Clamp).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on MHN30PDBGW0: 8540012 (Washer Tub-to-Pump Hose).

Before you buy

Match MHN30PDBGW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.