Parts for MDB8959SKW0 — Whirlpool Dishwasher

We found 13 parts confirmed to fit the Whirlpool Dishwasher MDB8959SKW0.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on MDB8959SKW0: W11414079 (User Interface Panel), W11413963 (Control Panel), W11550898 (BEZEL), W11579564 (SHIELD).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on MDB8959SKW0: W11550652 (CNTRL-ELEC), W11568793 (HARNS-WIRE), W11692161 (ICEMAKER), W11416363 (Pump And Motor), W10903468 (DIFFUSER), 4396277 (BARRIER).

Door and drum seals

Symptom: Water leaking out from around the door during or after a cycle.

Check: Check the door gasket for tears, flattening, or a section pulled loose from its channel, and confirm it seats evenly all the way around when the door is closed.

Parts in this group on MDB8959SKW0: W11661568 (GASKET-DOR).

Water inlet and drainage

Symptom: The dishwasher won't fill, or dishes come out with standing water still in the tub bottom after the cycle ends.

Check: Check the inlet valve's screen filter for sediment, and check the drain pump and drain hose for a clog or a jammed object -- a piece of broken glass or a bottle cap is a common culprit.

Parts in this group on MDB8959SKW0: W11497943 (Drain Pump).

Controls, timers and wiring

Symptom: A cycle that stops partway through, an error code or blinking light, or the unit not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on MDB8959SKW0: W11627526 (Wire Harness).

Before you buy

Match MDB8959SKW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dishwasher models

These model numbers sort next to this one in the catalog and are usually the same product family.

• MDB8959SKW1 — 19 parts
• MDB8959SKW2 — 19 parts
• MDB8959SKW3 — 10 parts
• MDB8959SKZ0 — 24 parts
• MDB8959SKZ1 — 18 parts
• MDB8959SKK0 — 24 parts
• MDB8959SKB3 — 18 parts
• MDB8959SKB2 — 19 parts
• MDB8959SKB1 — 19 parts
• MDB8959SKB0 — 24 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.