Parts for MAV8600AWW — Whirlpool Washer
We found 17 parts confirmed to fit the Whirlpool Washer MAV8600AWW.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WP22002708 | Washer Water Inlet Valve | 23 models | $104.78 |
| WP22002999 | Washer 4button Temperature Switch | 24 models | $144.04 |
| 22003595 | Isolator Foam Gasket | 30 models | $46.34 |
| 33001245 | Screw | 36 models | — |
| 12001413 | Strainer & Washer Kit | 47 models | $4.22 |
| WP903115 | Lock Indicator Light | 70 models | $6.52–$9.62 |
| WPY707702 | Locknut | 76 models | $3.70–$7.47 |
| WP22004469 | Rear Leveling Leg and Foot with Pad | 77 models | $11.49–$22.52 |
| 207843 | Transmission Lower Lip Seal Repair Kit | 77 models | $10.22–$17.35 |
| 21001516 | Motor with Pulley | 82 models | — |
| 22002838 | Clamp Spring | 105 models | — |
| 22002853 | Hose Clamp | 119 models | — |
| 22004297 | Pulley | 171 models | — |
| 21001506 | Washer Drive Motor | 174 models | — |
| 21001873 | Pump | 210 models | — |
| 216169 | Clamp,hose-i | 478 models | — |
| 337891 | Inlet Hose | 539 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on MAV8600AWW: WP22002708 (Washer Water Inlet Valve).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on MAV8600AWW: WP22002999 (Washer 4button Temperature Switch), 12001413 (Strainer & Washer Kit), WPY707702 (Locknut), 207843 (Transmission Lower Lip Seal Repair Kit), 22002853 (Hose Clamp), 21001873 (Pump), 216169 (Clamp,hose-i), 337891 (Inlet Hose).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on MAV8600AWW: 22003595 (Isolator Foam Gasket).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on MAV8600AWW: 33001245 (Screw), 22002838 (Clamp Spring).
Interior lighting
Symptom: The interior light doesn't turn on when the door opens.
Check: Confirm power is reaching the socket, then check the door-activated light switch before assuming the bulb itself is at fault.
Parts in this group on MAV8600AWW: WP903115 (Lock Indicator Light).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on MAV8600AWW: WP22004469 (Rear Leveling Leg and Foot with Pad).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on MAV8600AWW: 21001516 (Motor with Pulley), 22004297 (Pulley), 21001506 (Washer Drive Motor).
Before you buy
Match MAV8600AWW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.