Parts for MAV7600AWQ — Whirlpool Washer
We found 12 parts confirmed to fit the Whirlpool Washer MAV7600AWQ.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WP22002708 | Washer Water Inlet Valve | 23 models | $104.78 |
| 22003595 | Isolator Foam Gasket | 30 models | $46.34 |
| WP22003906 | Washer Analog Water Temperature Control Board | 30 models | $75.70 |
| 22003804 | Washer Lid Switch | 79 models | — |
| 21001516 | Motor with Pulley | 82 models | — |
| 22002838 | Clamp Spring | 105 models | — |
| 22002853 | Hose Clamp | 119 models | — |
| 22004297 | Pulley | 171 models | — |
| 21001506 | Washer Drive Motor | 174 models | — |
| 21001873 | Pump | 210 models | — |
| 216169 | Clamp,hose-i | 478 models | — |
| 337891 | Inlet Hose | 539 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on MAV7600AWQ: WP22002708 (Washer Water Inlet Valve).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on MAV7600AWQ: 22003595 (Isolator Foam Gasket).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on MAV7600AWQ: WP22003906 (Washer Analog Water Temperature Control Board).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on MAV7600AWQ: 22003804 (Washer Lid Switch).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on MAV7600AWQ: 21001516 (Motor with Pulley), 22004297 (Pulley), 21001506 (Washer Drive Motor).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on MAV7600AWQ: 22002838 (Clamp Spring).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on MAV7600AWQ: 22002853 (Hose Clamp), 21001873 (Pump), 216169 (Clamp,hose-i), 337891 (Inlet Hose).
Before you buy
Match MAV7600AWQ exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.