Parts for MAV6457AWW — Whirlpool Washer

We found 23 parts confirmed to fit the Whirlpool Washer MAV6457AWW.

Compatibility table

All 23 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
WP22004189Washer Timer6 models$156.73
WP22004188Washer Four Position Pressure Switch10 models$96.68
22003897Hose Clamp14 models
WP22003987Control Knob30 models$48.45
W10814230Lid Switch Actuating Cam30 models$9.62
WP22002754Plunger30 models$9.62
WP74010226SWITCH- RO30 models$52.67
WP22003989Timer Cap30 models$53.20
WP22002835Washer Bleach Cup (White)30 models$6.09
WP22003483Washer Drive Belt 52 Inches Long30 models$33.69
WP22002757Washer Guide Tube30 models$9.62
WP22002751Washer Lid Hinge Pin30 models$9.62
WP22003804Washer Lid Switch30 models$57.71
22003438Washer Pump Sleeve30 models$8.55
WP22004333Washer Water Inlet Valve30 models$103.79
33001245Screw36 models
21001750Motor (110v43 models
22002019Screw48 models
22003804Washer Lid Switch79 models
22004297Pulley171 models
21001506Washer Drive Motor174 models
21001873Pump210 models
337891Inlet Hose539 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on MAV6457AWW: WP22004189 (Washer Timer), WP22004188 (Washer Four Position Pressure Switch), WP22003989 (Timer Cap).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on MAV6457AWW: 22003897 (Hose Clamp), WP22002754 (Plunger), WP74010226 (SWITCH- RO), WP22002835 (Washer Bleach Cup (White)), 22003438 (Washer Pump Sleeve), 21001750 (Motor (110v), 21001873 (Pump), 337891 (Inlet Hose).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on MAV6457AWW: WP22003987 (Control Knob), WP22002757 (Washer Guide Tube), 33001245 (Screw), 22002019 (Screw).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on MAV6457AWW: W10814230 (Lid Switch Actuating Cam), WP22002751 (Washer Lid Hinge Pin), WP22003804 (Washer Lid Switch), 22003804 (Washer Lid Switch).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on MAV6457AWW: WP22003483 (Washer Drive Belt 52 Inches Long), 22004297 (Pulley), 21001506 (Washer Drive Motor).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on MAV6457AWW: WP22004333 (Washer Water Inlet Valve).

Before you buy

Match MAV6457AWW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.