Parts for MAV6057AWQ — Whirlpool Washer

We found 17 parts confirmed to fit the Whirlpool Washer MAV6057AWQ.

Compatibility table

All 17 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
WP22002708Washer Water Inlet Valve23 models$104.78
WP22004042Agitator Assembly30 models$152.61
WP22002754Plunger30 models$9.62
WP22003906Washer Analog Water Temperature Control Board30 models$75.70
WP22002835Washer Bleach Cup (White)30 models$6.09
WP22003483Washer Drive Belt 52 Inches Long30 models$33.69
WP22002757Washer Guide Tube30 models$9.62
22003438Washer Pump Sleeve30 models$8.55
33001245Screw36 models
21001516Motor with Pulley82 models
22002838Clamp Spring105 models
22002853Hose Clamp119 models
31001041Screw127 models
22004297Pulley171 models
21001506Washer Drive Motor174 models
22001659Dryer Timer Knob219 models
216169Clamp,hose-i478 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on MAV6057AWQ: WP22002708 (Washer Water Inlet Valve).

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on MAV6057AWQ: WP22004042 (Agitator Assembly).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on MAV6057AWQ: WP22002754 (Plunger), WP22002835 (Washer Bleach Cup (White)), 22003438 (Washer Pump Sleeve), 22002853 (Hose Clamp), 216169 (Clamp,hose-i).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on MAV6057AWQ: WP22003906 (Washer Analog Water Temperature Control Board), 22001659 (Dryer Timer Knob).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on MAV6057AWQ: WP22003483 (Washer Drive Belt 52 Inches Long), 21001516 (Motor with Pulley), 22004297 (Pulley), 21001506 (Washer Drive Motor).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on MAV6057AWQ: WP22002757 (Washer Guide Tube), 33001245 (Screw), 22002838 (Clamp Spring), 31001041 (Screw).

Before you buy

Match MAV6057AWQ exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.