Parts for KUDS01FKPA1 — Whirlpool Dishwasher
We found 12 parts confirmed to fit the Whirlpool Dishwasher KUDS01FKPA1.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 8519616 | Dishrack | 15 models | — |
| WP8268701 | Dishwasher Adjuster Actuator Left Side | 30 models | $36.85 |
| WP8270168 | Dishwasher Electronic Control Board | 30 models | $173.80 |
| 8268572 | Inlet Valve | 151 models | — |
| 8268408 | Dish Pump | 181 models | — |
| 8268398 | Impeller | 198 models | — |
| 8268422 | Dishwasher Pump and Motor Assembly | 242 models | — |
| 8268407 | Motor | 253 models | — |
| 8270022 | Link | 500 models | — |
| 8524474 | Dishwasher Door Balance Wheel | 1,301 models | — |
| 661566 | Dishwasher Thermostat | 3,785 models | — |
| 8269144 | Dishwasher Drain Hose | 5,275 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Dishrack hardware (rollers, wheels and tines)
Symptom: A dish rack that binds, drags, or comes off its rail track when you pull it in or out, or a rack with a cracked, loose, or missing wheel or tine.
Check: Pull the rack fully out and check each wheel or roller for a crack or a missing axle pin, and check that tines aren't snapped off or pushed out of alignment along the row.
Parts in this group on KUDS01FKPA1: 8519616 (Dishrack).
Drive system (belts, pulleys, motors)
Symptom: A dish rack, spray arm, or wash-motor component isn't turning or sliding the way it should.
Check: Check that the part in question turns or slides freely by hand, and look for a cracked, worn, or seized point where it should pivot or roll.
Parts in this group on KUDS01FKPA1: WP8268701 (Dishwasher Adjuster Actuator Left Side).
Controls, timers and wiring
Symptom: A cycle that stops partway through, an error code or blinking light, or the unit not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on KUDS01FKPA1: WP8270168 (Dishwasher Electronic Control Board).
Water inlet and drainage
Symptom: The dishwasher won't fill, or dishes come out with standing water still in the tub bottom after the cycle ends.
Check: Check the inlet valve's screen filter for sediment, and check the drain pump and drain hose for a clog or a jammed object -- a piece of broken glass or a bottle cap is a common culprit.
Parts in this group on KUDS01FKPA1: 8268572 (Inlet Valve), 8269144 (Dishwasher Drain Hose).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on KUDS01FKPA1: 8268408 (Dish Pump), 8268398 (Impeller), 8268422 (Dishwasher Pump and Motor Assembly), 8268407 (Motor), 8270022 (Link), 8524474 (Dishwasher Door Balance Wheel).
Heat control (thermostats, fuses, heating element)
Symptom: Dishes don't dry at the end of the cycle, or a heated-dry setting doesn't seem to do anything.
Check: With the dishwasher unplugged, check continuity across the heating element or thermostat with a multimeter -- no continuity means it has failed.
Parts in this group on KUDS01FKPA1: 661566 (Dishwasher Thermostat).
Before you buy
Match KUDS01FKPA1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Dishwasher models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.