Parts for KUDR01TJBT0 — Whirlpool Dishwasher
We found 12 parts confirmed to fit the Whirlpool Dishwasher KUDR01TJBT0.
Same parts list as KUDR01TJBL0 (Whirlpool Dishwasher). KUDR01TJBT0 shares an identical confirmed parts list with KUDR01TJBL0 (Whirlpool Dishwasher). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for KUDR01TJBT0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 8268781 | Dishrack | 4 models | — |
| WP8268701 | Dishwasher Adjuster Actuator Left Side | 30 models | $36.85 |
| WP8268933 | Splash Guard | 30 models | $46.34 |
| 8268572 | Inlet Valve | 151 models | — |
| 8268408 | Dish Pump | 181 models | — |
| 8268422 | Dishwasher Pump and Motor Assembly | 242 models | — |
| 8268407 | Motor | 253 models | — |
| 8270022 | Link | 500 models | — |
| 8268888 | Dishwasher Door Seal | 1,120 models | — |
| 8524474 | Dishwasher Door Balance Wheel | 1,301 models | — |
| 661566 | Dishwasher Thermostat | 3,785 models | — |
| 8269144 | Dishwasher Drain Hose | 5,275 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Dishrack hardware (rollers, wheels and tines)
Symptom: A dish rack that binds, drags, or comes off its rail track when you pull it in or out, or a rack with a cracked, loose, or missing wheel or tine.
Check: Pull the rack fully out and check each wheel or roller for a crack or a missing axle pin, and check that tines aren't snapped off or pushed out of alignment along the row.
Parts in this group on KUDR01TJBT0: 8268781 (Dishrack).
Drive system (belts, pulleys, motors)
Symptom: A dish rack, spray arm, or wash-motor component isn't turning or sliding the way it should.
Check: Check that the part in question turns or slides freely by hand, and look for a cracked, worn, or seized point where it should pivot or roll.
Parts in this group on KUDR01TJBT0: WP8268701 (Dishwasher Adjuster Actuator Left Side).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on KUDR01TJBT0: WP8268933 (Splash Guard), 8268408 (Dish Pump), 8268422 (Dishwasher Pump and Motor Assembly), 8268407 (Motor), 8270022 (Link), 8524474 (Dishwasher Door Balance Wheel).
Water inlet and drainage
Symptom: The dishwasher won't fill, or dishes come out with standing water still in the tub bottom after the cycle ends.
Check: Check the inlet valve's screen filter for sediment, and check the drain pump and drain hose for a clog or a jammed object -- a piece of broken glass or a bottle cap is a common culprit.
Parts in this group on KUDR01TJBT0: 8268572 (Inlet Valve), 8269144 (Dishwasher Drain Hose).
Door and drum seals
Symptom: Water leaking out from around the door during or after a cycle.
Check: Check the door gasket for tears, flattening, or a section pulled loose from its channel, and confirm it seats evenly all the way around when the door is closed.
Parts in this group on KUDR01TJBT0: 8268888 (Dishwasher Door Seal).
Heat control (thermostats, fuses, heating element)
Symptom: Dishes don't dry at the end of the cycle, or a heated-dry setting doesn't seem to do anything.
Check: With the dishwasher unplugged, check continuity across the heating element or thermostat with a multimeter -- no continuity means it has failed.
Parts in this group on KUDR01TJBT0: 661566 (Dishwasher Thermostat).
Before you buy
Match KUDR01TJBT0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Dishwasher models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.