Parts for GLE12HSLARSS — Refrigerator
We found 8 parts confirmed to fit the Refrigerator GLE12HSLARSS.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WR01X29720 | Refrigerator Magnet | 3 models | — |
| WR01X28530 | Adjustable Leveling Leg | 6 models | — |
| WR02X44465 | Heat Probe | 7 models | — |
| WR55X28330 | Fresh Food Thermistor Upper | 10 models | — |
| WR02X4039 | Refrigerator Clamp | 34 models | — |
| WR29X10021 | Refrigerator Ice Maker Fill Cup | 228 models | — |
| WR30X10093 | G.E. Refrigerator Ice Maker Kit WR30X10093 | 1,244 models | $248.00 |
| WR86X96 | Refrigerator Filter Dryer | 4,258 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on GLE12HSLARSS: WR01X29720 (Refrigerator Magnet), WR01X28530 (Adjustable Leveling Leg), WR02X44465 (Heat Probe), WR02X4039 (Refrigerator Clamp), WR86X96 (Refrigerator Filter Dryer).
Heat control (thermostats, fuses, heating element)
Symptom: The refrigerator's temperature reads inconsistently, or the compressor and defrost cycle seem out of step with how warm or cold it actually is inside.
Check: A thermistor that has drifted or failed reports the wrong temperature to the control board, so compare the compartment's actual temperature to what the display or dial shows.
Parts in this group on GLE12HSLARSS: WR55X28330 (Fresh Food Thermistor Upper).
Ice maker and dispenser system
Symptom: No ice production, a jammed dispenser chute, or water leaking into the ice bin.
Check: Confirm water is actually reaching the icemaker (check the inlet valve and fill tube for a freeze-up), and check that the auger or dispenser motor turns freely without binding.
Parts in this group on GLE12HSLARSS: WR29X10021 (Refrigerator Ice Maker Fill Cup), WR30X10093 (G.E. Refrigerator Ice Maker Kit WR30X10093).
Before you buy
Match GLE12HSLARSS exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most refrigerators, the model and serial plate sits inside on a side wall or behind the bottom grille. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Other refrigerator models
These model numbers sort close to this one in the catalog for the same appliance type. The brand is not confirmed to match, but the model number range is close.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.