Parts for GHDT108V00BB — GE Dishwasher
We found 8 parts confirmed to fit the GE Dishwasher GHDT108V00BB.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WD26X10059 | Dishwasher Wash Pump Motor Assembly | 87 models | — |
| WD01X10419 | Dishwasher Tub Insulation | 127 models | — |
| WD01X10103 | Dishwasher Hose Clamp | 216 models | — |
| WD22X10063 | Dishwasher Spray Arm | 231 models | — |
| WD02X10169 | Dishwasher Screw, B-16 x 1/2-in | 361 models | — |
| WD08X10055 | Dishwasher Door Seal | 413 models | — |
| WD18X10026 | Dishwasher Sump Inlet | 504 models | — |
| WD24X10035 | Drain Tube | 1,088 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on GHDT108V00BB: WD26X10059 (Dishwasher Wash Pump Motor Assembly), WD01X10419 (Dishwasher Tub Insulation), WD01X10103 (Dishwasher Hose Clamp).
Filtration and spray system
Symptom: Dishes come out with food residue, spots, or a cloudy film, or you notice leftover debris in the tub bottom after a cycle.
Check: Remove and rinse the filter assembly under the tub, and check that the spray arm spins freely and its jets aren't clogged -- these are the first things to check before assuming a pump has failed.
Parts in this group on GHDT108V00BB: WD22X10063 (Dishwasher Spray Arm), WD18X10026 (Dishwasher Sump Inlet).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on GHDT108V00BB: WD02X10169 (Dishwasher Screw, B-16 x 1/2-in), WD24X10035 (Drain Tube).
Door and drum seals
Symptom: Water leaking out from around the door during or after a cycle.
Check: Check the door gasket for tears, flattening, or a section pulled loose from its channel, and confirm it seats evenly all the way around when the door is closed.
Parts in this group on GHDT108V00BB: WD08X10055 (Dishwasher Door Seal).
Before you buy
Match GHDT108V00BB exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most dishwashers, the model and serial plate sits on the edge of the door or the tub rim. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Dishwasher models
These model numbers sort next to this one in the catalog and are usually the same product family.
Other models with this exact parts list
Each model below is confirmed to share the identical compatible-parts list with this one.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.