Parts for GFW450SPK0DG — GE Washer
We found 11 parts confirmed to fit the GE Washer GFW450SPK0DG.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WH08X20906 | GASKET | 6 models | $296.28 |
| WH23X25518 | Washer Drain Pump | 9 models | — |
| WH02X20920 | Washer Door Hinge Block | 14 models | — |
| WH01X20826 | G.E. Washer Shock Absorber | 24 models | — |
| WH01X20823 | Washer Door Lock Strike | 24 models | — |
| WH43X10059 | Washer Dispenser Actuator | 25 models | — |
| WH08X10056 | Washer Door Boot Spring Clamp | 36 models | — |
| WH05X10012 | Washer Suspension Spring | 52 models | — |
| WH13X10029 | Washer Water Inlet Valve | 53 models | — |
| WH07X10022 | Washer Drive Pulley Kit | 55 models | — |
| WH23X10029 | Washer Drain Pump Filter | 158 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on GFW450SPK0DG: WH08X20906 (GASKET).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on GFW450SPK0DG: WH23X25518 (Washer Drain Pump), WH13X10029 (Washer Water Inlet Valve), WH23X10029 (Washer Drain Pump Filter).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on GFW450SPK0DG: WH02X20920 (Washer Door Hinge Block), WH08X10056 (Washer Door Boot Spring Clamp).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on GFW450SPK0DG: WH01X20826 (G.E. Washer Shock Absorber), WH01X20823 (Washer Door Lock Strike).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on GFW450SPK0DG: WH43X10059 (Washer Dispenser Actuator), WH07X10022 (Washer Drive Pulley Kit).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on GFW450SPK0DG: WH05X10012 (Washer Suspension Spring).
Before you buy
Match GFW450SPK0DG exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.