Parts for DHDVH66GH0WW — GE Dryer

We found 143 parts confirmed to fit the GE Dryer DHDVH66GH0WW.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on DHDVH66GH0WW: WE14M94 (Blower Housing), WE19M1523 (Control Panel), WE19M1527 (Control Panel), WE20M328 (Cover " Gran), WE20M358 (Cover "onyx), WE1M709 (Door Hinge), WE1M579 (Door Hinge Cover), WE1M710 (Dryer Door Hinge), WE13M41 (Dryer Motor Bracket), WE1M697 (Film Knob), WE20M326 (Front Panel), WE2M212 (Hinge Screw), WE19M1438 (Housing), WE20M329 (Panel), WE20M357 (Panel), WE20M359 (Panel), WE20M383 (Panel), WE2M233 (Screw # 10 B), WE1M564 (Shield), WE1M582 (Screw), WE13X0169 (Bracket Coil), WE1M155 (Cordset Clip), WE1M707 (Door Handle), WE19M1437 (Dryer Control Panel Cover, Rear), WE1M565 (Dryer Control Panel Seal, Upper), WE1M568 (Dryer Drying Rack), WE20M325 (Dryer Front Panel), WE19M1536 (Housing), WE2M225 (Screw (White)), WE2M210 (Screw Back H), WE2M211 (Screw Front), WE20M327 (Dryer Top Panel (White)).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on DHDVH66GH0WW: WE20M331 (Chassis), WE1M705 (Door Outer R), WE13M40 (Gas Valve Br), 3116153 (Install Intructions), WE19M1425 (Lexan Window), WE4M489 (Main Power Board), WE1M563 (Plus Minus B), WE1M559 (Start Pause), 4990316 (Use And Care Guide), WE1M593 (Window), WE1M585 (Plate), WE26M335 (Fisher & Paykel Cord Set), WE1M571 (Door Guide), WE1M567 (Door Reversal Plug), WE10M122 (Dryer Door Assembly (Chrome)), WE1M558 (Dryer My Cycle Control Push Button), WE1M557 (Dryer Power Button), WE4M384 (Dryer User Interface), WE1M560 (Bar Graph Bu), WE10M124 (Door Asm Bla), WE9M31 (Dryer Drum Felt Seal), WE1M562 (Lock Button), WE1M561 (Option Button), WE1M578 (Dryer Door Outer Window), WE2M213 (Nut-strip Do).

Venting and airflow

Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.

Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.

Parts in this group on DHDVH66GH0WW: WE18M24 (Lint Filter).

Door and drum seals

Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.

Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.

Parts in this group on DHDVH66GH0WW: WE9M19 (Door Seal).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on DHDVH66GH0WW: WE5M47 (Dryer Heating Element Control Thermistor).

Before you buy

Match DHDVH66GH0WW exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring GE Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

• DHDVH66GH1BB — 10 parts
• DHDVH66GH1GG — 10 parts
• DHDVH66GH1WW — 24 parts
• DHDVH66GH2BB — 15 parts
• DHDVH66GH2GG — 27 parts
• DHDVH66GH0GG — 11 parts
• DHDVH66GH0BB — 10 parts
• DHDVH66EH3WW — 14 parts
• DHDVH66EH3GG — 13 parts
• DHDVH66EH3BB — 12 parts

Other models with this exact parts list

Each model below is confirmed to share the identical compatible-parts list with this one.

• DCVH660GH0BB — 10 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.