Parts for CHW9900VQ0 — Whirlpool Washer

We found 25 parts confirmed to fit the Whirlpool Washer CHW9900VQ0.

Compatibility table

All 25 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
WPW10525360Control Electric3 models$175.82
WPW10130455Bellow4 models$174.78
W10190648Cap11 models
W10190647Filter11 models
W10201457Seal11 models
WPW10197864Motor Control Board21 models$276.67
W11622908CLAMP30 models$23.60
WPW10137460Commercial Cover30 models$72.00
W10029820Cord, Power30 models$66.77
W10200297Counterweight30 models$262.79
WPW10375379Door Lock Latch - 240V 60HZ30 models$173.67
WPW10198458Retainer30 models$6.40
280251TUB-OUTER30 models$248.89
WP8540393Washer Cam Actuator30 models$9.62
WPW10143586Washer Dispenser Actuator Switch30 models$92.29
WPW10112925Washer Door Handle - White30 models$24.67
WP8540402Washer Drawer Detergent30 models$98.16
WPW10388418Washer Drive Belt30 models$51.61
WPW10163171Washer Shock Absorber30 models$86.17
8540751Washer Water Inlet Valve129 models
8540015Washer Vent Bellows139 models
W10130913Washer Drain Pump Assembly179 models
8540063Washer Dispenser Hose201 models
370450Clamp368 models
487576Refrigerator Washer6,907 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on CHW9900VQ0: WPW10525360 (Control Electric), WPW10130455 (Bellow), W10190647 (Filter), W10201457 (Seal), W11622908 (CLAMP), W10029820 (Cord, Power), W10200297 (Counterweight), WPW10375379 (Door Lock Latch - 240V 60HZ), WPW10198458 (Retainer), WP8540402 (Washer Drawer Detergent), WPW10163171 (Washer Shock Absorber), 8540015 (Washer Vent Bellows), 8540063 (Washer Dispenser Hose), 370450 (Clamp), 487576 (Refrigerator Washer).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on CHW9900VQ0: W10190648 (Cap), WPW10137460 (Commercial Cover), WPW10112925 (Washer Door Handle - White).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on CHW9900VQ0: WPW10197864 (Motor Control Board).

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on CHW9900VQ0: 280251 (TUB-OUTER).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on CHW9900VQ0: WP8540393 (Washer Cam Actuator), WPW10143586 (Washer Dispenser Actuator Switch), WPW10388418 (Washer Drive Belt).

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on CHW9900VQ0: 8540751 (Washer Water Inlet Valve), W10130913 (Washer Drain Pump Assembly).

Before you buy

Match CHW9900VQ0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.