Parts for CDT865SSJ0SS — GE Washer
We found 8 parts confirmed to fit the GE Washer CDT865SSJ0SS.
Same parts list as CDT865SMJ0DS (GE Washer). CDT865SSJ0SS shares an identical confirmed parts list with CDT865SMJ0DS (GE Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for CDT865SSJ0SS.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| WD22X21034 | SIDE BLASTER Assembly | 30 models | $35.80 |
| WD01X20302 | Clamp | 149 models | — |
| WD21X22830 | Dishwasher Turbidity Sensor | 255 models | — |
| WD24X10062 | Dishwasher Drain Hose | 455 models | — |
| WD01X10573 | Kit - Piranh | 512 models | — |
| WD01X10572 | Kit - Piranh | 533 models | — |
| WD08X22095 | Dishwasher Tub Gasket | 684 models | — |
| WD21X10490 | G.E. Dishwasher Door Latch Lock | 1,109 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on CDT865SSJ0SS: WD22X21034 (SIDE BLASTER Assembly), WD01X20302 (Clamp), WD21X22830 (Dishwasher Turbidity Sensor), WD01X10573 (Kit - Piranh), WD01X10572 (Kit - Piranh).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on CDT865SSJ0SS: WD24X10062 (Dishwasher Drain Hose).
Door and drum seals
Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.
Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.
Parts in this group on CDT865SSJ0SS: WD08X22095 (Dishwasher Tub Gasket).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on CDT865SSJ0SS: WD21X10490 (G.E. Dishwasher Door Latch Lock).
Before you buy
Match CDT865SSJ0SS exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring GE Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.