Parts for CDT725SSF2SS — GE Washer

We found 9 parts confirmed to fit the GE Washer CDT725SSF2SS.

Compatibility table

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Water inlet and drainage

Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.

Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.

Parts in this group on CDT725SSF2SS: WD26X20740 (Drain Pump), WD24X10062 (Dishwasher Drain Hose).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on CDT725SSF2SS: WD22X21034 (SIDE BLASTER Assembly), WD05X10015 (Dishwasher Heater Element), WD01X10571 (Kit - Piranh), WD01X10573 (Kit - Piranh), WD01X10572 (Kit - Piranh).

Door and drum seals

Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.

Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.

Parts in this group on CDT725SSF2SS: WD08X20675 (Dishwasher Tub Gasket).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on CDT725SSF2SS: WD21X10490 (G.E. Dishwasher Door Latch Lock).

Before you buy

Match CDT725SSF2SS exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring GE Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

• CDT765SSF0SS — 8 parts
• CDT765SSF1SS — 8 parts
• CDT765SSF7SS — 9 parts
• CDT865SMJ0DS — 8 parts
• CDT865SMJ2DS — 8 parts
• 57751H3WW — 10 parts

Other washer models

These model numbers sort close to this one in the catalog for the same appliance type. The brand is not confirmed to match, but the model number range is close.

• CDP2406H — 8 parts
• CDP2406A — 8 parts
• CDP2406 — 8 parts
• CDE8500W — 8 parts
• CDE8500AZW — 8 parts

Other models with this exact parts list

Each model below is confirmed to share the identical compatible-parts list with this one.

• GDT720SGF2BB — 9 parts

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.