Parts for CDG8990XW1 — Whirlpool Dryer

We found 20 parts confirmed to fit the Whirlpool Dryer CDG8990XW1.

Compatibility table

All 20 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W11676916BURNER-GAS30 models$143.13
WP3405160Blower Wheel Belt30 models$20.37
WPW10163915Door Seal30 models$62.60
WPW10131172Dryer Drive Belt30 models$32.63
W10850397HANDLE30 models$26.82
W11234001Motor Drive30 models$216.40
W11661105Outer Door Ring (White)30 models$80.89
WPW10344192Pulley Idle30 models$68.86
W11247665SWITCH30 models$27.36
WPW10135255Switch30 models$161.92
W10328463Dryer Gas Valve Coil Kit42 models
W10166807Seal208 models
3392519Dryer Thermal Fuse461 models
3394341Motor Pulley865 models
690997Dryer Tri-Ring Retainer1,075 models
W10314171Dryer Drum Support Roller2,050 models
8577274Dryer Thermistor2,595 models
338906Dryer Radiant Sensor2,725 models
80047Dryer Repair Kit2,939 models
690081Catch5,852 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on CDG8990XW1: W11676916 (BURNER-GAS), W11661105 (Outer Door Ring (White)), W11247665 (SWITCH), WPW10135255 (Switch), W10328463 (Dryer Gas Valve Coil Kit), W10166807 (Seal), 690997 (Dryer Tri-Ring Retainer), 338906 (Dryer Radiant Sensor), 80047 (Dryer Repair Kit), 690081 (Catch).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on CDG8990XW1: WP3405160 (Blower Wheel Belt), WPW10131172 (Dryer Drive Belt), W11234001 (Motor Drive), WPW10344192 (Pulley Idle), 3394341 (Motor Pulley), W10314171 (Dryer Drum Support Roller).

Door and drum seals

Symptom: A drum seal that's worn through, letting the dryer pull in room air instead of pushing heated air through the load.

Check: Look for the drum seal fraying or missing where it meets the front or rear bulkhead -- worn felt or foam here is visible once the front panel is off.

Parts in this group on CDG8990XW1: WPW10163915 (Door Seal).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on CDG8990XW1: W10850397 (HANDLE).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on CDG8990XW1: 3392519 (Dryer Thermal Fuse), 8577274 (Dryer Thermistor).

Before you buy

Match CDG8990XW1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.