Parts for A106S — Whirlpool Washer
We found 49 parts confirmed to fit the Whirlpool Washer A106S.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 400179 | Hose Clamp | 25 models | — |
| WP60A57420 | Agitator Drive Shaft Seal | 30 models | $26.82 |
| WP22001619 | Air Tube for Tub Fill Volume | 30 models | $69.91 |
| 12112425 | Belt Kit | 30 models | $32.63 |
| WPY056016 | Center Seal Grease - 4 oz. | 30 models | $13.92 |
| WPY015666 | Center Seal Retaining Washer | 30 models | $9.62 |
| WPW10548433 | Clamp | 30 models | $7.09 |
| 203956 | Damper Pad Kit | 30 models | $38.96 |
| WP211948 | Drive Belt - 120v 50 cycle | 30 models | $84.23 |
| 12002351 | Drive Motor - One Speed - 120V | 30 models | $128.66 |
| WP211949 | Eyebolt Nut | 30 models | $7.47 |
| WP22213057 | Injector Sleeve Bracket - Side Mounting | 30 models | $9.62 |
| WP213720 | Lid Switch Actuator Spring | 30 models | $9.62 |
| WP22003555 | Lock Washer for Stop Lug | 30 models | $19.30 |
| 12002352 | MOTOR-DRVE | 30 models | $256.38 |
| WP211232 | Outer Tub Clamp Seal | 30 models | $55.29 |
| WPY212989 | Outer Tub to Pump Hose | 30 models | $44.23 |
| WP211451 | Pump Belt | 30 models | $72.00 |
| WP215120 | SEAL FOR I | 30 models | $7.47 |
| WP210286 | Seal | 30 models | $8.55 |
| 76660 | Siphon Break Kit | 30 models | $78.56 |
| WP22001650 | Spring Retaining Clip | 30 models | $9.62 |
| 202718 | Tension Springs -Set of 2 | 30 models | $16.07 |
| 2301530 | Transmission Drive Pulley | 30 models | $113.45 |
| 2040130 | Tub Bearing Kit | 30 models | $70.95 |
| W10175939 | Tub Bolt | 30 models | $7.47 |
| WP212716 | Washer Lid Bumper | 30 models | $7.47 |
| WP207360 | Washer Water Level Pressure Infinite Switch | 30 models | $104.33 |
| 205613 | Water Inlet Valve | 30 models | $79.98 |
| WP62011900 | Brake Assembly | 47 models | $88.44 |
| 12001413 | Strainer & Washer Kit | 47 models | $4.22 |
| WP62114830 | WASHER- SP | 47 models | $6.34 |
| W11129403 | BOLT | 64 models | $13.72–$21.45 |
| 22003428 | Adjustable Leveling Leg | 75 models | $9.82–$17.15 |
| WP213013 | Injector Hose | 76 models | $17.81–$42.12 |
| WP211089 | LUG- STOP | 76 models | $7.98–$11.77 |
| WP210385 | Lock Nut | 76 models | $4.42–$7.47 |
| WP213015 | Plastic Injector Nozzle | 76 models | $7.21–$9.62 |
| WP22003441 | Rear Bearing | 76 models | $7.82–$18.22 |
| WP210684 | Rubber Foot Pad | 76 models | $6.13–$11.77 |
| WP216201 | Rubber Injector Valve | 76 models | $11.12–$20.37 |
| WP211726 | Washing Machine Lid Hinge Ball | 76 models | $5.30–$9.62 |
| WP3367052 | Hose Clamp | 77 models | $5.16–$9.62 |
| WPW10346892 | Washer Screw | 77 models | $4.91–$7.47 |
| 205000 | Glide and Spring Kit | 84 models | $26.02–$54.24 |
| 201011 | Hose Clamp | 353 models | — |
| 200461 | Hose Clamp | 470 models | — |
| 211125 | Washer Drive Belt | 821 models | — |
| 211124 | Washer Pump Drive Belt | 821 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on A106S: 400179 (Hose Clamp), WPY056016 (Center Seal Grease - 4 oz.), WPY015666 (Center Seal Retaining Washer), WPW10548433 (Clamp), 203956 (Damper Pad Kit), WP211949 (Eyebolt Nut), WP22003555 (Lock Washer for Stop Lug), 12002352 (MOTOR-DRVE), WP211232 (Outer Tub Clamp Seal), WPY212989 (Outer Tub to Pump Hose), WP215120 (SEAL FOR I), WP210286 (Seal), 2040130 (Tub Bearing Kit), W10175939 (Tub Bolt), WP212716 (Washer Lid Bumper), WP207360 (Washer Water Level Pressure Infinite Switch), WP62011900 (Brake Assembly), 12001413 (Strainer & Washer Kit), WP62114830 (WASHER- SP), W11129403 (BOLT), WP213013 (Injector Hose), WP211089 (LUG- STOP), WP210385 (Lock Nut), WP213015 (Plastic Injector Nozzle), WP22003441 (Rear Bearing), WP210684 (Rubber Foot Pad), WP216201 (Rubber Injector Valve), WP3367052 (Hose Clamp), 201011 (Hose Clamp), 200461 (Hose Clamp).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on A106S: WP60A57420 (Agitator Drive Shaft Seal), 22003428 (Adjustable Leveling Leg).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on A106S: WP22001619 (Air Tube for Tub Fill Volume), WP22213057 (Injector Sleeve Bracket - Side Mounting), WP22001650 (Spring Retaining Clip), 202718 (Tension Springs -Set of 2), WPW10346892 (Washer Screw), 205000 (Glide and Spring Kit).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on A106S: 12112425 (Belt Kit), WP211948 (Drive Belt - 120v 50 cycle), 12002351 (Drive Motor - One Speed - 120V), WP211451 (Pump Belt), 2301530 (Transmission Drive Pulley), 211125 (Washer Drive Belt), 211124 (Washer Pump Drive Belt).
Door, lid switches and latches
Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.
Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.
Parts in this group on A106S: WP213720 (Lid Switch Actuator Spring), WP211726 (Washing Machine Lid Hinge Ball).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on A106S: 76660 (Siphon Break Kit), 205613 (Water Inlet Valve).
Before you buy
Match A106S exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.