Parts for 7MWGT4027HW1 — Whirlpool Dryer

We found 23 parts confirmed to fit the Whirlpool Dryer 7MWGT4027HW1.

Compatibility table

All 23 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W11222849VALVE17 models$92.70
W11176112Washer Lid Lock Assembly17 models$103.32
W11189162Door Switch19 models$48.45
W11028744LATCH20 models$124.60
W10854240Timer24 models$138.61
W11661765CTRL-CCU-PIMA ALTO 3, FSOU MX, 120V ASM30 models$160.80
W11168256Cycle Selector Switch30 models$96.49
WPW10420741Dryer Push-to-Start Switch30 models$27.36
3392235ALP Conversion Kit30 models$52.75
W10890624Motor Drive30 models$218.45
W11229602SEAL30 models$57.38
W10859568Selector Switch30 models$81.23
W10919003Water Pump30 models$160.99
W10821951Damper Assembly84 models
W10815026Washer Actuator146 models
W10721967Washer Drive Pulley442 models$21.38–$38.96
W10468057Dryer Idler Pulley1,009 models
3397590Support1,362 models
279948Dryer Repair Kit2,252 models
3387610Dryer Drive Belt2,528 models
697772Dryer Blower Wheel2,988 models
694539Dryer Gas Valve Coil Kit3,982 models
694540Dryer Valve Coil Kit3,988 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 7MWGT4027HW1: W11222849 (VALVE), W11028744 (LATCH), W11661765 (CTRL-CCU-PIMA ALTO 3, FSOU MX, 120V ASM), WPW10420741 (Dryer Push-to-Start Switch), 3392235A (LP Conversion Kit), W11229602 (SEAL), W10821951 (Damper Assembly), 279948 (Dryer Repair Kit), 694539 (Dryer Gas Valve Coil Kit), 694540 (Dryer Valve Coil Kit).

Door, lid switches and latches

Symptom: The dryer won't run, or stops, unless the door is fully latched shut.

Check: Listen for an audible click when the door closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on 7MWGT4027HW1: W11176112 (Washer Lid Lock Assembly), W11189162 (Door Switch).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 7MWGT4027HW1: W10854240 (Timer), W11168256 (Cycle Selector Switch), W10859568 (Selector Switch).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 7MWGT4027HW1: W10890624 (Motor Drive), W10815026 (Washer Actuator), W10721967 (Washer Drive Pulley), W10468057 (Dryer Idler Pulley), 3387610 (Dryer Drive Belt).

Water inlet and drainage

Symptom: The unit isn't getting water when it should, or isn't draining or pumping it out when it should.

Check: Check the valve or pump for a clog or jammed object, and confirm the hose isn't kinked, restricted, or routed higher than the unit allows.

Parts in this group on 7MWGT4027HW1: W10919003 (Water Pump).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 7MWGT4027HW1: 3397590 (Support).

Venting and airflow

Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.

Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.

Parts in this group on 7MWGT4027HW1: 697772 (Dryer Blower Wheel).

Before you buy

Match 7MWGT4027HW1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.