Parts for 7MWGD9400TU2 — Whirlpool Dryer

We found 22 parts confirmed to fit the Whirlpool Dryer 7MWGD9400TU2.

Compatibility table

All 22 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10012480ADAPTER30 models$22.52
WPW10129065Clip30 models$11.77
W10180120Door Shield30 models$56.33
279936Exhaust Duct47 models$30.84
WP596797Terminal Pin47 models$3.90
WP233520Thrust Washer47 models$3.39
661570VWhirlpool Dryer Drum Belt 661570V47 models$19.54–$21.08
303776SCREW67 models$6.49–$11.77
WPW10314173Dryer Drum Support Roller77 models$9.83–$19.30
WP3406653Dryer Moisture Sensor Wire Harness77 models$35.22–$80.82
279640Idler Pulley77 models$13.16–$32.10
W10837240Idler Pulley with Bracket78 models$12.78–$27.37
8536973Support1,632 models
3388674Bracket2,504 models
3387610Dryer Drive Belt2,528 models
3388672Dryer Idler Pulley2,555 models
8577274Dryer Thermistor2,595 models
80047Dryer Repair Kit2,939 models
697772Dryer Blower Wheel2,988 models
694539Dryer Gas Valve Coil Kit3,982 models
694540Dryer Valve Coil Kit3,988 models
690081Catch5,852 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 7MWGD9400TU2: W10012480 (ADAPTER), 279936 (Exhaust Duct), WP596797 (Terminal Pin), WP233520 (Thrust Washer), 80047 (Dryer Repair Kit), 694539 (Dryer Gas Valve Coil Kit), 694540 (Dryer Valve Coil Kit), 690081 (Catch).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 7MWGD9400TU2: WPW10129065 (Clip), W10180120 (Door Shield), 303776 (SCREW), 8536973 (Support), 3388674 (Bracket).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 7MWGD9400TU2: 661570V (Whirlpool Dryer Drum Belt 661570V), WPW10314173 (Dryer Drum Support Roller), 279640 (Idler Pulley), W10837240 (Idler Pulley with Bracket), 3387610 (Dryer Drive Belt), 3388672 (Dryer Idler Pulley).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, an unresponsive display, or the dryer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 7MWGD9400TU2: WP3406653 (Dryer Moisture Sensor Wire Harness).

Heat control (thermostats, fuses, heating element)

Symptom: The dryer runs but produces no heat, or it shuts off partway through the cycle.

Check: With the dryer unplugged, check continuity across the part with a multimeter -- no continuity means it has failed. Clear the lint vent first, since a blocked vent is what usually trips a thermal fuse in the first place.

Parts in this group on 7MWGD9400TU2: 8577274 (Dryer Thermistor).

Venting and airflow

Symptom: A dryer that needs multiple cycles to dry, runs unusually hot, or repeatedly trips its heat-limit switch.

Check: Clear the lint screen and the full vent run to the outside wall -- a restricted vent is the single most common cause of long dry times and repeat thermal-fuse failures.

Parts in this group on 7MWGD9400TU2: 697772 (Dryer Blower Wheel).

Before you buy

Match 7MWGD9400TU2 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most dryers, the model and serial plate sits inside the door opening or behind the lint trap. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Dryer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.