Parts for 7MMMS0160VW0 — Whirlpool Washer

We found 15 parts confirmed to fit the Whirlpool Washer 7MMMS0160VW0.

Compatibility table

All 15 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10155438Gear Case6 models
WPW10093672Agitator30 models$153.13
WPW10110020Agitator30 models$90.58
WP8577787Timer, Control (60 Hz.) (Motor30 models$193.37
W10339250Water-Level Pressure Switch30 models$119.53
W10172898Gear&pinon35 models
W11243704DIAL47 models$24.37
8528157Washer Drive Motor66 models
8546456Dryer Connecting Rack77 models
8318084Washer Lid Switch Assembly1,137 models
383727Washer Tub Gasket1,419 models
3951311Clutch2,217 models
388952Drive Basket3,383 models
62621Actuator4,378 models
389140Washer Drive Block4,956 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 7MMMS0160VW0: W10155438 (Gear Case), 8528157 (Washer Drive Motor), 62621 (Actuator).

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on 7MMMS0160VW0: WPW10093672 (Agitator), WPW10110020 (Agitator), 388952 (Drive Basket).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 7MMMS0160VW0: WP8577787 (Timer, Control (60 Hz.) (Motor), W10339250 (Water-Level Pressure Switch).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 7MMMS0160VW0: W10172898 (Gear&pinon), W11243704 (DIAL), 3951311 (Clutch), 389140 (Washer Drive Block).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 7MMMS0160VW0: 8546456 (Dryer Connecting Rack).

Door, lid switches and latches

Symptom: The washer won't start, or it stops mid-cycle as soon as the lid is opened.

Check: Listen for an audible click when the lid closes. No click, or a visibly cracked plastic tab on the latch, points to this part.

Parts in this group on 7MMMS0160VW0: 8318084 (Washer Lid Switch Assembly).

Door and drum seals

Symptom: A door boot or gasket that's torn or losing its seal, letting water leak out during the wash or spin cycle.

Check: Check the door boot or gasket for tears, especially near the drain hole at the bottom, and confirm it isn't pinched or twisted where it clamps to the drum.

Parts in this group on 7MMMS0160VW0: 383727 (Washer Tub Gasket).

Before you buy

Match 7MMMS0160VW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.