Parts for 4KATW5415FW0 — Whirlpool Washer
We found 25 parts confirmed to fit the Whirlpool Washer 4KATW5415FW0.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| W10795114 | Main Support | 12 models | — |
| W10919224 | LATCH | 22 models | $112.44 |
| W11682068 | Vertical Suspension Damper Assembly | 22 models | $54.24 |
| W11024702 | DISPENSER | 30 models | $61.55 |
| WPW10558463 | Knob | 30 models | $55.29 |
| WPW10562155 | Knob | 30 models | $54.24 |
| WPW10556325 | Ring Tub | 30 models | $92.98 |
| WPW10285517 | Selector Switch | 30 models | $65.73 |
| WPW10550173 | Shield | 30 models | $19.35 |
| W10919191 | Washer Washplate | 30 models | $120.55 |
| W10694685 | Wire Harness | 30 models | $87.41 |
| W10868094 | Wire Harness | 30 models | $81.63 |
| W11454372 | Washer Gear Case | 47 models | $172.42–$204.37 |
| W11511138 | ACTUATOR | 51 models | $31.23–$48.45 |
| W10836692 | Washing Machine Upper Agitator | 55 models | $44.03–$78.38 |
| W10528947 | Drive Hub Kit | 71 models | $14.07–$27.36 |
| 8312709 | Laundry Appliance End Cap Clip | 76 models | — |
| W10714899 | Strike Pima | 87 models | — |
| W10221546 | Washer Drain Hose | 144 models | — |
| 8572540 | Hose | 222 models | — |
| W10396887 | Driveblock - | 224 models | — |
| 8533953 | Washer Screw | 354 models | — |
| W10003790 | Washer Screw | 390 models | — |
| W10721967 | Washer Drive Pulley | 442 models | $21.38–$38.96 |
| W10006384 | Washer Drive Belt | 611 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 4KATW5415FW0: W10795114 (Main Support), WPW10558463 (Knob), WPW10562155 (Knob), WPW10550173 (Shield), 8312709 (Laundry Appliance End Cap Clip), 8533953 (Washer Screw), W10003790 (Washer Screw).
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 4KATW5415FW0: W10919224 (LATCH), W11024702 (DISPENSER), WPW10556325 (Ring Tub), W10528947 (Drive Hub Kit), W10714899 (Strike Pima), 8572540 (Hose), W10396887 (Driveblock -).
Suspension and tub hardware
Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.
Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.
Parts in this group on 4KATW5415FW0: W11682068 (Vertical Suspension Damper Assembly), W10919191 (Washer Washplate), W10836692 (Washing Machine Upper Agitator).
Controls, timers and wiring
Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.
Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.
Parts in this group on 4KATW5415FW0: WPW10285517 (Selector Switch), W10694685 (Wire Harness), W10868094 (Wire Harness).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on 4KATW5415FW0: W11454372 (Washer Gear Case), W11511138 (ACTUATOR), W10721967 (Washer Drive Pulley), W10006384 (Washer Drive Belt).
Water inlet and drainage
Symptom: A washer that won't fill, fills slowly, won't drain, or leaves standing water in the tub.
Check: For fill problems, check the inlet valve's screen filters for sediment. For drain problems, check the pump for a jammed object and confirm the drain hose isn't kinked or looped too high.
Parts in this group on 4KATW5415FW0: W10221546 (Washer Drain Hose).
Before you buy
Match 4KATW5415FW0 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Neighbouring Whirlpool Washer models
These model numbers sort next to this one in the catalog and are usually the same product family.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.