Parts for 3LMVWC415FW1 — Whirlpool Washer

We found 24 parts confirmed to fit the Whirlpool Washer 3LMVWC415FW1.

Compatibility table

All 24 confirmed parts, ordered so parts that fit fewer models (more specific to this appliance) appear first.
Part #PartAlso fitsReference price
W10836496Agitator7 models$72.00
W10846191Washer Washplate12 models$130.30
W11284133RETAINER - D14 models
W10236981Hose19 models
W10919224LATCH22 models$112.44
W11385424DRIVE BLOCK RETAINER30 models$11.77
WPW10558463Knob30 models$55.29
WPW10562155Knob30 models$54.24
WPW10556325Ring Tub30 models$92.98
W11223765SCREW30 models$21.45
WPW10285517Selector Switch30 models$65.73
WPW10550173Shield30 models$19.35
W10780044Washer Suspension Rod Kit30 models$100.54
W10694685Wire Harness30 models$87.41
W10903968GEARCASE ASSEMBLY32 models
W11454372Washer Gear Case47 models$172.42–$204.37
W11511138ACTUATOR51 models$31.23–$48.45
W10528947Drive Hub Kit71 models$14.07–$27.36
8312709Laundry Appliance End Cap Clip76 models
W10714899Strike Pima87 models
W11203364HOSE ASM - D113 models
8317496Clamp142 models
W10396887Driveblock -224 models
8533953Washer Screw354 models

Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.

Common failure areas on this model

The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.

Suspension and tub hardware

Symptom: Excessive vibration, banging, or the machine "walking" during the spin cycle.

Check: Check that all leveling legs are actually contacting the floor, then inspect the suspension rods or springs for wear or a broken mount point.

Parts in this group on 3LMVWC415FW1: W10836496 (Agitator), W10846191 (Washer Washplate), W10780044 (Washer Suspension Rod Kit).

General hardware and mounting parts

Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.

Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.

Parts in this group on 3LMVWC415FW1: W11284133 (RETAINER - D), W10236981 (Hose), W10919224 (LATCH), W11385424 (DRIVE BLOCK RETAINER), WPW10556325 (Ring Tub), W10903968 (GEARCASE ASSEMBLY), W10528947 (Drive Hub Kit), W10714899 (Strike Pima), W11203364 (HOSE ASM - D), 8317496 (Clamp), W10396887 (Driveblock -).

Storage, trim and cosmetic hardware

Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.

Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.

Parts in this group on 3LMVWC415FW1: WPW10558463 (Knob), WPW10562155 (Knob), W11223765 (SCREW), WPW10550173 (Shield), 8312709 (Laundry Appliance End Cap Clip), 8533953 (Washer Screw).

Controls, timers and wiring

Symptom: A cycle that doesn't advance, the wrong water level filling, an unresponsive display, or the washer not starting at all.

Check: Look for burn marks or a burnt smell near the board or terminals, and check whether buttons and knobs respond -- a unit that powers on but won't cycle often traces back to this group.

Parts in this group on 3LMVWC415FW1: WPW10285517 (Selector Switch), W10694685 (Wire Harness).

Drive system (belts, pulleys, motors)

Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.

Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.

Parts in this group on 3LMVWC415FW1: W11454372 (Washer Gear Case), W11511138 (ACTUATOR).

Before you buy

Match 3LMVWC415FW1 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.

How to confirm this is your model

On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.

Neighbouring Whirlpool Washer models

These model numbers sort next to this one in the catalog and are usually the same product family.

Still not sure?

Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.