Parts for 113X225941 — Washer
We found 5 parts confirmed to fit the Washer 113X225941.
Same parts list as 113225941 (Washer). 113X225941 shares an identical confirmed parts list with 113225941 (Washer). That page is the canonical version of this parts list — use it if you want the primary reference, or stay here since the list below is exactly the same for 113X225941.
Compatibility table
| Part # | Part | Also fits | Reference price |
|---|---|---|---|
| 68069 | Sander Disc Drive Shaft | 6 models | — |
| 47222 | Sander Backstop | 14 models | — |
| 38536 | Sander Idler Shaft Bearing | 14 models | — |
| 38812 | Sander Woodruff Key | 15 models | — |
| 69184 | Power Tool Motor Mounting Bracket | 21 models | — |
Prices shown are an informational reference range only, not an offer or an Amazon price — RepairKitHub does not sell parts directly. Each part links to an Amazon search so you can compare current listings yourself.
Common failure areas on this model
The confirmed parts above group into a handful of failure areas. Here is what each points to and how to check it before you order anything.
General hardware and mounting parts
Symptom: A small mechanical or mounting part has failed, cracked, or gone missing.
Check: Compare the physical shape and mounting points to the original piece, and confirm the exact part number against your model plate before ordering.
Parts in this group on 113X225941: 68069 (Sander Disc Drive Shaft), 47222 (Sander Backstop), 38812 (Sander Woodruff Key).
Drive system (belts, pulleys, motors)
Symptom: A drum or tub that won't turn, a burning-rubber smell, or a loud thump or squeal during a cycle.
Check: With power off, turn the drum or tub by hand -- resistance or grinding points to the motor or a bearing, and a cracked, glazed, or snapped belt is visible once the cabinet is open.
Parts in this group on 113X225941: 38536 (Sander Idler Shaft Bearing).
Storage, trim and cosmetic hardware
Symptom: A cracked shelf, broken door bin, worn hinge, or missing trim piece -- cosmetic and storage wear rather than a functional breakdown.
Check: Match the physical dimensions and mounting tabs of the old part before ordering; these pieces are often model-specific even between visually similar models.
Parts in this group on 113X225941: 69184 (Power Tool Motor Mounting Bracket).
Before you buy
Match 113X225941 exactly against the model and serial plate on the appliance itself before ordering anything — a single mismatched character can point to a different production run with different parts. Then check the part number printed or stamped on the part you are replacing against the part numbers in the table above; the printed number is the most reliable way to confirm fitment when a model has gone through multiple production runs. RepairKitHub does not sell parts directly — every part link above routes to an Amazon search for that part number so you can compare current listings and sellers yourself.
How to confirm this is your model
On most washers, the model and serial plate sits under the lid or on the back panel. Match every character exactly, including letters and dashes at the end — appliance model numbers often have similar prefixes but different suffixes for different production runs.
Other washer models
These model numbers sort close to this one in the catalog for the same appliance type. The brand is not confirmed to match, but the model number range is close.
Still not sure?
Use the model lookup tool to search by model or part number, or start from the symptom your appliance is showing.